Need some guidance
06-25-2020, (Subject: Need some guidance ) 
Post: #12
RE: Need some guidance
so the like $50 blend door actuator probably fried and got stuck on heat.....easy fix go under bunk pull actuator off take flat head screw driver flip to other direction and wallah AC.


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
 Thanks given by: Waterloo


Messages In This Thread
Need some guidance - Ricky - 06-23-2020,
RE: Need some guidance - JimT - 06-23-2020,
RE: Need some guidance - Rawze - 06-24-2020,
RE: Need some guidance - Ricky - 06-24-2020,
RE: Need some guidance - Ricky - 06-24-2020,
RE: Need some guidance - Ricky - 06-25-2020,
RE: Need some guidance - Lonestar10 - 06-25-2020
RE: Need some guidance - Ricky - 06-25-2020,
RE: Need some guidance - Ricky - 06-25-2020,
RE: Need some guidance - Ricky - 07-12-2020,
RE: Need some guidance - Ricky - 12-09-2020,
RE: Need some guidance - Ricky - 12-09-2020,
RE: Need some guidance - Ricky - 12-09-2020,
RE: Need some guidance - Ricky - 01-22-2021,
RE: Need some guidance - Ricky - 01-22-2021,
RE: Need some guidance - Nilao - 01-22-2021,
RE: Need some guidance - Ricky - 01-22-2021,
RE: Need some guidance - Nilao - 01-23-2021,
RE: Need some guidance - Nilao - 01-23-2021,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.