Insite

[JimT]

(07-12-2020 )Log lugger Wrote:  Hello,I have just gotten set up to use in line on my truck.laptop with nexiq link.computer has all required programs installed and I'm ready to hook up.trouble is,I don't know much about computers or Windows 7 or any of that stuff ,so I guess what I'm after is what to do next.I only have used my bluepoint code reader to date no codes coming up currently on that.only problem currently is low boost with my new turbocharger max is about 25 whereas my old one would make about 38 which from what I've read here is proper for the 870/8518.I'm a little nervous about hooking the in-line up and screwing something up by not being computer savvy.what to do next?

very little you can screw up with inline adapter and insite without trying really really hard. I'm no turbo guru though, so I can't help with that.

If you have everything hooked up and installed correctly then it's just a matter of connecting to the ECM. Once connected take a little time to get familir with the different menus, tabs and options. Some menu items (such as clearing fault codes) can be accessed by right clicking on on the codes.

Data Monitor will probably be the most helpful in your case.

Have you watched Rawze's video about setting up Insite?