Home Oil Change and a bunch of other random questions

[Chamberpains]

1. pressure test coolant system up to 20 psi leave it sit for awhile. Turn the engine over by hand a couple times to check for coolant running/dripping from anywhere on the bottom end.

2. Jack the steer tire just high enough to get it off the ground by a hair. Then unbolt and replace the springs. It allows you to roll the axle around a bit to line things up with the hangers when reassembling.

3. Coroseal and por15 are the go to on this site for painting and sealing rusty stuff and stuff you want a permanent seal coat on.

4. Oil pan gaskets are reusable. Except when monkeys hammer them down with an impact gun and squish the gasket in to oblivion.