My Pete rebuild

[Nostalgic]

(07-18-2020 )Rawze Wrote:  

(07-18-2020 )Nostalgic Wrote:  Is it possible to reset the idler gear lash without pulling the cam gears? My timing is right on, but can turn the damper back (counter clockwise) about 1/8" from the insert pin mark with the cams wedged.

Since I'm under a load and booked myself 7 loads this week (WTF was I thinking? These redheaded step children can't be depended on that long lol!), I don't really want to tear into it until next weekend. Think it's ok to run out the week as-is?

ur just a glutton for punishment... when some1 is here for a rebuild, we throw away those spring loaded gears. they are more of a hazard than they help. Ask waterloo what i think of those gears.

All non-scissor gears in mine.