Helping my mechanic

[Rawze]

Sounds to me like someone creating a cluster#$fuk...

* incorrect program in the engine can cause those issues.

* bad de-mandate programming can cause those issues.

* And/Or Wrong style of fuel pedal?.

======

First and foremost, someone needs to eliminate the possibility of bad de-mandate programming by putting in the correct factory program into the engine that matches the engine and truck, then go from there.

ALSO ... The emissions ... goes with the engine, so if they are putting a CM2350 into an older 2006 truck, then all the emissions components needs to be installed onto the truck too ... (even if they plan on de-mandating it) simply because at some point, that truck is going to get an inspection somewhere and someone is going to be in deep doo-doo with all the stuff missing!!!!.

-- save a few thousands in return for a complete nightmare of a problem + a truck that is going to fail inspection everywhere it goes. At some point, someone will likely regret that decision.