Cm870 low oil pressure

[berrytrucking94]

(07-26-2020 )tree98 Wrote:  Did you pressurize the coolant and look for leaks around the liners before you took the head off?? For all you know you have a liner starting to sink right now. If so you'll be tearing back into it in short order AND you'll be replacing the head a second time because the liner will dance around and wear a groove in it. You aren't going to save any money by half assing it, many of us can attest to that!

We did not pressurize it and I wish we did. I’ve always stood by better safe than sorry with maintenance so why stop now right. This far in we might as well rip the rest out and start fresh