Crank seal tool
07-26-2020, (Subject: Crank seal tool ) 
Post: #2
RE: Crank seal tool
Brock, I had a similar leak. No clue where at front structure. I went to NAPA and bought 8 bottles of that Oil UV Dye and an inexpensive UV light kit. Dumped the bottles in the crankcase, drove around for half an hour... I found the leak, I thought it was down near the crankshaft, it was right up there at the top cover, on driver side where crankcase filter box is... I fixed the leak in the driveway, gasket looked good, replaced and then ran a small bead of rtv around the front. Near as I can figure there was some slight warp age to the cover. No leaky.


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
 Thanks given by: Brock


Messages In This Thread
Crank seal tool - Brock - 07-26-2020,
RE: Crank seal tool - Waterloo - 07-26-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.