| 450ST CM2250 Help |
| 08-16-2020, (Subject: 450ST CM2250 Help ) Post: #7 | |||
| |||
| RE: 450ST CM2250 Help Rebuilt head? Not an in frame with a new head? Sounds like someone took a few shortcuts, a few too many if that is the case. More than likely needs to be in framed, a complete rebuild, especially if it is a reman head, which are junk. More than likely the motor needs help, I would not boost anything on it until it is throughly inspected, checking for coolant leaks and really looking over that head, cam and rollers... And the lower end... If that has not been done, throwing a rod through the side of the block is a real possibility. Wrist pins... User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
450ST CM2250 Help - BTrain - 08-16-2020, RE: 450ST CM2250 Help - JimT - 08-16-2020, RE: 450ST CM2250 Help - BTrain - 08-16-2020, RE: 450ST CM2250 Help - Waterloo - 08-16-2020, RE: 450ST CM2250 Help - BTrain - 08-16-2020, RE: 450ST CM2250 Help - Waterloo - 08-16-2020, RE: 450ST CM2250 Help - Waterloo - 08-16-2020 RE: 450ST CM2250 Help - JimT - 08-18-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.