2010 KW T660 abs control module location?

[Moose]

Meanwhile is correct. On the b-cabs the ABS module and the CECU are stacked behind the cup holders. You may have one or more chassis nodes. The first should be inside the frame rail, on the drivers side around the trans area.

If it's an ABS issue take the panel down above the clutch pedal where the 9-pin is mounted. There is a J1708 junction block specific to the ABS that can get wet if you happen to have water leaking in through the mirror, mirror wiring or windshield. Don't ask me how I found that one.....