7 codes J1939 system down
08-28-2020, (Subject: 7 codes J1939 system down ) 
Post: #3
RE: 7 codes J1939 system down
Right now it's 120 ohms with the 14 pin connector unplugged and the nox sensor both connected and dis connected. The batteries are disconnected also. I found the terminating resistor in the harness it tests good. Wouldn't the circuit be at 60 ohms if the nox sensor was unplugged or bad?
replyreply


Messages In This Thread
RE: 7 codes J1939 system down - tree98 - 08-28-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.