Fault code 2754 - CM2250
09-04-2020, (Subject: Fault code 2754 - CM2250 ) 
Post: #13
RE: Fault code 2754 - CM2250
Get the iMap and the exhaust back pressure sensor. If you have not replaced the fuel doser at the turbo, do that too! There is a core deposit on the doser, so remove before taking to dealer, and you will have to drain off around 8 gals of coolant to remove. You need a vacuum set up to refill coolant properly.

Here is the vacuum set up I use with my Cobalt 90psi compressor, https://amzn.to/2F0V6Br
There are other setups for half the price on amazon. They all do the same thing, just need a homeowners compressor to use. A 20 gallon unit will get her done. Like this... https://amzn.to/2EZA0TS


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply
 Thanks given by: PinneyKW


Messages In This Thread
RE: Fault code 2754 - CM2250 - Waterloo - 09-04-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.