Fault code 2754 - CM2250
09-04-2020, (Subject: Fault code 2754 - CM2250 ) 
Post: #15
RE: Fault code 2754 - CM2250
(09-04-2020 )PinneyKW Wrote:  
(09-04-2020 )Waterloo Wrote:  Get the iMap and the exhaust back pressure sensor. If you have not replaced the fuel doser at the turbo, do that too! There is a core deposit on the doser, so remove before taking to dealer, and you will have to drain off around 8 gals of coolant to remove. You need a vacuum set up to refill coolant properly.

Will do and much appreciated! We replaced the 7th injector at the turbo a few weeks ago, completely clogged.

2 to 3 gallons of oil, you need to in frame it... The oil is clogging your emission system up...


User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.
replyreply


Messages In This Thread
RE: Fault code 2754 - CM2250 - Waterloo - 09-04-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.