Helping JimT out with an inframe ...

[JimT]

Yup, spending extra time cleaning and painting things that I never plan to touch again, if I can help it! Much easier to clean the grease/oil/dirt/peeling paint off while the parts are removed. It's gonna look shiny new red from the frame rails up. Far from a high quality paint job though. 1 thick, slightly runny coat of IH Red paint from Tractor Supply is all most stuff gets. Looks like Cummins Red but goes on much thicker and takes about 4 times as long to dry. A little Corroseal on select parts exposed to road salt.

   

Would be nearing completion today if I didn't spend all day waiting to to go the parts store for some small odds and ends. Probably gonna add yet another day to the project :/