Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Things that may help others... / Harmonic Balancer or Damper...

new reply
Harmonic Balancer or Damper...
08-05-2016, (Subject: Harmonic Balancer or Damper... ) 
Post: #25
Old Driver Offline
HMR- Contributing Memeber  (58 Likes)  ****

 		Posts: 117
Joined: May 2016
Thanks: 185
Given 58 thank(s) in 27 post(s)
RE: Harmonic Balancer or Damper...
A few pictures of the work involved.
Took about 2.5 hours at pilot truck stop in 100 degree weather going slow and easy.
$550 at cummins southern plains in tx.
18mm socket.
Breaker bar with an extension to take off.
130 ft pounds torque.
Mine came off kinda easy off the shaft.


Attached File(s)Image(s)
./uploads/201608/post_2083_1470454049_096f9536ff52b79e1f531e758f3261de.jpg./uploads/201608/post_2083_1470454014_295dbc42f6e902509e0329c76f965487.jpg./uploads/201608/post_2083_1470453983_cc922b6c36c820eab3f26034e5655044.jpg./uploads/201608/post_2083_1470453953_d1f075bbdc256e0dd82bb64a76cef439.jpg./uploads/201608/post_2083_1470453899_d23169df92f4427b623a1929f54f36c8.jpg
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: Harmonic Balancer or Damper... - Old Driver - 08-05-2016
RE: Harmonic Balancer or Damper... - Unilevers - 08-07-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication