Installing Solar on the truck...

[Waterloo]

(09-08-2020 )JimT Wrote:  Looking at your pictures I notice you taped down all sides... I thought the point of the corrugated plastic was to allow air flow under the panel?

I thought the same too, but not for airflow, but to create a barrier for cooling between the roof and backside of the panel, at least that is what the experts say that tape all the way around them... The one issue I know some of these flexible solar panels have is hot spots, and I believe these panels are for that, to keep the hot spots at bay, at least that is my "assumption"...

Well, finally quit raining, going to see if I can get some work done today!