Windshield washer fluid line failed... Have question.

[Waterloo]

(08-08-2016 )Rawze Wrote:  

(08-06-2016 )Waterloo Wrote:  ...
and the line runs through the harness to boot
...

The best thing you can do is GET THAT WASHER LINE OUT OF THAT HARNESS IT RUINS THROUGH AND RE-ROUTE IT BY ITSELF!!!!!!!!


The washer line on many prostars runs through the wiring harness for the headlight circuits as well on the drivers side under the frame. It eventually cracks over time and leaks windshield washer fluid into the wiring harness and corrodes all the wiring making for a LOT of problems!.

Just got home... That was my plan, pull the old line and run a fresh new one on a different route. Line will be in tomorrow morning, real oddball size, 6.98mm if I remember correctly...

And then to top all of this off... I pull into the driveway, smoke coming out from under the hood... AC condenser is cracked... The damn hits keep coming!