Cm871 hammering, poor thing

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 06-21-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Cm871 hammering, poor thing

10-07-2020, (Subject: Cm871 hammering, poor thing )

Post: #4

Signature620 Offline

Offline

Contributing V.I.P. (839 Likes)

Posts: 736
Joined: May 2015

Thanks: 625
Given 839 thank(s) in 448 post(s)

RE: Cm871 hammering, poor thing

Horrible knocking sound only at 1500rpm is nearly always the damper. Have a feel around the back of it on the intake side. That rear face should be flat - If it's bulging then the silicon/gel inside has gone hard.

Once you get Insite, get someone to check your ECM code is right for your engine aswell.

Return to Top | find

Thanks given by:

Rawze , SquareOne , Waterloo , marek4792

« Next Oldest | Next Newest »

Messages In This Thread

Cm871 hammering, poor thing - txfarmer - 10-07-2020,

RE: Cm871 hammering, poor thing - Waterloo - 10-07-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-09-2020,

RE: Cm871 hammering, poor thing - Waterloo - 10-10-2020,

RE: Cm871 hammering, poor thing - Rawze - 10-07-2020,

RE: Cm871 hammering, poor thing - Signature620 - 10-07-2020

RE: Cm871 hammering, poor thing - marek4792 - 10-07-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-08-2020,

RE: Cm871 hammering, poor thing UPDATE! - txfarmer - 10-23-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-23-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-23-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-23-2020,

RE: Cm871 hammering, poor thing - Nilao - 10-23-2020,

RE: Cm871 hammering, poor thing - marek4792 - 10-24-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-24-2020,

RE: Cm871 hammering, poor thing - txfarmer - 10-31-2020,

RE: Cm871 hammering, poor thing - Rawze - 11-01-2020,

RE: Cm871 hammering, poor thing - txfarmer - 12-04-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design