| ABS lamp |
| 10-08-2020, (Subject: ABS lamp ) Post: #2 | |||
| |||
| RE: ABS lamp (repost)- When is the last time the wheel bearings were all re-torqued. -- Neglect of not re-torquing the wheel bearings every 250k miles like they are supposed to be is the #1 cause of ABS wheel sensor lights. If your unsure when they were done last, or know it has been more than 250k miles ... Re-torque all the wheel bearings and reset the ABS sensors to the correct distance (then drive it about 10 miles so the lights go out again) and you will likely find that your problems go away ... does not matter which wheel went off,.. all wheel bearings have to be done regularly if you value your tires and equipment life. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
RE: ABS lamp - Rawze - 10-08-2020 RE: ABS lamp - Wildcard - 10-08-2020, RE: ABS lamp - JimE - 10-08-2020, RE: ABS lamp - snailexpress - 10-09-2020, RE: ABS lamp - Yauchout - 10-09-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.