Won't Rev past 1500rpm

new reply

Threaded Mode | Linear Mode

Won't Rev past 1500rpm

10-10-2020, (Subject: Won't Rev past 1500rpm )

Post: #1

JoshT800 Offline

Established (0 Likes)

Posts: 4
Joined: Oct 2020

Thanks: 6
Given 0 thank(s) in 0 post(s)

Won't Rev past 1500rpm

My Kenworth T800 developed a problem where it won't rev pass 1500rpm, no matter the speed. It has an ISX CM871. The speedo is working, don't know if there is another sensor i should check or change. The truck was parked for a little over a week, before that everything was good.
I scanned it and got 2 errors non-relating to my problem which was to do with the particulate filter, which was unplugged since before.

Any help or ideas would be very appreciative.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Won't Rev past 1500rpm - JoshT800 - 10-10-2020

RE: Won't Rev past 1500rpm - Signature620 - 10-10-2020,

RE: Won't Rev past 1500rpm - Rawze - 10-10-2020,

RE: Won't Rev past 1500rpm - JoshT800 - 10-11-2020,

RE: Won't Rev past 1500rpm - Rawze - 10-11-2020,

RE: Won't Rev past 1500rpm - Nilao - 10-11-2020,

RE: Won't Rev past 1500rpm - Waterloo - 10-11-2020,

RE: Won't Rev past 1500rpm - JoshT800 - 10-11-2020,

RE: Won't Rev past 1500rpm - Rawze - 10-11-2020,

RE: Won't Rev past 1500rpm - JoshT800 - 10-20-2020,

RE: Won't Rev past 1500rpm - JimT - 10-21-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.