Fan Control Circuit engine shutoff |
11-05-2020, (Subject: Fan Control Circuit engine shutoff ) Post: #12 | |||
| |||
RE: Fan Control Circuit engine shutoff (11-05-2020 )snailexpress Wrote: I would check OEM wire harness first. If wire from FAN CONTROL pin has shorts with other wires in harness or bad ground on solenoid or relay ( I don't have your truck schematic) it will create a lot of strange things. I had already disconnected the oem ecu connector and thats where i am reading the output voltages | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.