| Learning insite scared to change settings myself |
| 11-18-2020, (Subject: Learning insite scared to change settings myself ) Post: #7 | |||
| |||
RE: Learning insite scared to change settings myself (11-15-2020 )rraccerr Wrote: I am following Rawze advice to learn Cummins insite. Without hooking it up to ecm I can do certain things, but I need to hook it up to ecm to look at work order changes and to change To the proper mandate recommendations. Scared I might #**#*$=#= it up. Is there a way to be hooked up to the ecm and change it using the simulator. I been reading all the glossary but it is only explains whaat happens if you touch certain buttons. It does not show how. Hope I explained this right Courage is being scared to death But saddling up anyway John Wayne User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Learning insite scared to change settings myself - rraccerr - 11-15-2020, RE: Learning insite scared to change settings myself - Chamberpains - 11-16-2020, RE: Learning insite scared to change settings myself - hhow55 - 11-16-2020, RE: Learning insite scared to change settings myself - barf - 11-16-2020, RE: Learning insite scared to change settings myself - Rawze - 11-16-2020, RE: Learning insite scared to change settings myself - rolling18 - 11-18-2020, RE: Learning insite scared to change settings myself - hhow55 - 11-18-2020 RE: Learning insite scared to change settings myself - Coronado126 - 11-19-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.