| CM870 loosing coolant/possible inflame |
| 11-19-2020, (Subject: CM870 loosing coolant/possible inflame ) Post: #8 | |||
| |||
| RE: CM870 loosing coolant/possible inflame Thanks for the replies. All of the pulleys spins fine. But I can't manually spin the crankshaft. I tried to set up with Haggai but they are busy till December 7. I'm stopping driving at this time but I'm afraid I have to find a shop first since it probably won't start at all after I leave it for a couple of days. Any shops you guys can recommend in GA/FL area who does an inframe? How do I pull out the copy of the software of the ECM? | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
CM870 loosing coolant/possible inflame - Koren - 11-17-2020, RE: CM870 loosing coolant/possible inflame - Coronado126 - 11-17-2020, RE: CM870 loosing coolant/possible inflame - Koren - 11-17-2020, RE: CM870 loosing coolant/possible inflame - Coronado126 - 11-17-2020, RE: CM870 loosing coolant/possible inflame - hhow55 - 11-17-2020, RE: CM870 loosing coolant/possible inflame - amermextrucker - 11-17-2020, RE: CM870 loosing coolant/possible inflame - Rawze - 11-18-2020, RE: CM870 loosing coolant/possible inflame - Koren - 11-19-2020 RE: CM870 loosing coolant/possible inflame - Squish099 - 11-19-2020, RE: CM870 loosing coolant/possible inflame - Coronado126 - 11-19-2020, RE: CM870 loosing coolant/possible inflame - tree98 - 11-19-2020, RE: CM870 loosing coolant/possible inflame - hhow55 - 11-19-2020, RE: CM870 loosing coolant/possible inflame - Volvo8873 - 11-19-2020, RE: CM870 loosing coolant/possible inflame - amermextrucker - 11-20-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.