ISX Cam wedges

[Rawze]

(12-03-2020 )eggtrucks Wrote:  ... i purchased some aftermarket cam wedges/pin and cam gear puller on ebay, $60 for everything.Is this ok or is it recommended to use only cummins tools?

You need to at least compare them to an official tool to ensure the angles cut into the wedges are accurate.

BE careful of some types of gear pullers for the ISX.. the wrong type can cause the cam to jump back when the gear breaks loose, It will blow-out the retaining plate in the back of the head. Seen that a few times with people who try to use regular steering wheel or gear pullers on those cams.