Egr

[Coronado126]

(12-09-2020 )BIASRacing Wrote:  

(12-09-2020 )Coronado126 Wrote:  The general recommendation is that the EGR systems components are left in place, but that the exhaust ports of the EGR cooler are welded shut with a thick disc of stainless steel, and the EGR crossover tube connection at the intake manifold is done the same with same style of stainless disc.

The EGR cooler needs to be left in place to help supply coolant to the back of the engine. If removed you need to install a bypass tube or a hose where the coolant connections for the cooler used to be.

I personally have not found a source of those discs to block the exhaust of the cooler. I have to make them.

I should have specified, I can't find a source that fits my requirements for quality.


Like Waterloo said, you need thick high quality stainless to prevent the erosion from exhaust gas.