CUMMINS SWAP 2250 to 2350.
01-02-2021, (Subject: CUMMINS SWAP 2250 to 2350. ) 
Post: #5
RE: CUMMINS SWAP 2250 to 2350.
(01-02-2021 )marek4792 Wrote:  do the J1939 settings in the new ecm match the old ecm settings in insite?

yes all that is same/switched to what it should be. just the other stuff wasn't sure if it was problem with data link and 250k baud rate or 500k baud rate
replyreply


Messages In This Thread
RE: CUMMINS SWAP 2250 to 2350. - ESDrepair - 01-02-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.