Cascadia shut off randomly and turns back on while driving on the road

[Rawze]

(01-15-2021 )medseg2003 Wrote:  I am replacing part now, it looks like 1 tappet goes deeper than the other .both of them are locked on the pin so when i try to put back head pump with barrels and spring back to the pump it doesn't go all the way throughout because barrel and spring in the right side touch the tappet first before the left side barrels witch make a gap between the head pump assembly and the pump do i can just keep tightin bolts i am afraid to break the bolts t have attachedpictures showing what i have done
thx rawze

Follow the procedures on quickserve.cummins.com on how to do this job. Quickserv is free so if you don't have an account there go sign up and you will have everything you need to know about your engine including all procedures, part#'s and drawings like this.

There are also quite a few forum members on here who have done this job for themselves.. maybe they will chime in as well.

here is a related video that may be helpful as well.
https://youtu.be/-Gu5Eyx2SWw