| ISX 450 CM570 taking too long to start and using too much oil |
| 01-23-2021, (Subject: ISX 450 CM570 taking too long to start and using too much oil ) Post: #10 | |||
| |||
RE: ISX 450 CM570 taking too long to start and using too much oil (01-23-2021 )christiank77 Wrote: Thanks for the liner pictures. Now I know what normal wear looks like and what damage can happen due to abuse. I would not know if my ECM has any custom programming but I will look for someone to do the download and post copy so that you can review it. Is it similar to downloading from a PLC?I work with PLCs. ECMs are totally new territory. I made a youtube video on lateral thrust recently and how programming effects it. This type of issue is what shortens engine life and causes liner fretting, etc. Its worth the watch... User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
RE: ISX 450 CM570 taking too long to start and using too much oil - Rawze - 01-23-2021 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.