ecm completed regens |
01-23-2021, (Subject: ecm completed regens ) Post: #12 | |||
| |||
RE: ecm completed regens (01-23-2021 )jman1978 Wrote: thanks for the reply After spending lots of time and money it became apparent that my DOC/DPF needed to be replaced and my engine's oil consumption was too high. As I couldn't afford an inframe at that time I decided that a replacement DOC/DPF wasn't the way to go and opted for a drill, crowbar and hammer... User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..." | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
ecm completed regens - jman1978 - 01-13-2021, RE: ecm completed regens - JimT - 01-13-2021, RE: ecm completed regens - jman1978 - 01-14-2021, RE: ecm completed regens - Rawze - 01-14-2021, RE: ecm completed regens - jman1978 - 01-14-2021, RE: ecm completed regens - Rawze - 01-14-2021, RE: ecm completed regens - jman1978 - 01-14-2021, RE: ecm completed regens - jman1978 - 01-24-2021, RE: ecm completed regens - Rawze - 01-24-2021, RE: ecm completed regens - RollinCoal - 01-14-2021, RE: ecm completed regens - JimT - 01-19-2021, RE: ecm completed regens - jman1978 - 01-23-2021, RE: ecm completed regens - JimT - 01-23-2021 RE: ecm completed regens - jman1978 - 01-23-2021, RE: ecm completed regens - Chamberpains - 01-23-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.