Is it mandatory for a 5 inch pound torque wrench

new reply

Threaded Mode | Linear Mode

Is it mandatory for a 5 inch pound torque wrench

02-01-2021, (Subject: Is it mandatory for a 5 inch pound torque wrench )

Post: #3

marek4792 Offline

HMR-Contrinbuting V.I.P. (461 Likes)

Posts: 661
Joined: Jan 2016

Thanks: 357
Given 461 thank(s) in 296 post(s)

RE: Is it mandatory for a 5 inch pound torque wrench

Are you trying to set the injector preload? If so, a dial style torque wrench is heavily recommended due to the fact if you use a clicking style wrench by the time it clicks you may have already overtighten the adjustment screw.

Return to Top | find

reply reply

Thanks given by:

90petercar

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Chamberpains - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - marek4792 - 02-01-2021

RE: Is it mandatory for a 5 inch pound torque wrench - Waterloo - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Waterloo - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - JimT - 02-04-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-05-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - JimT - 02-05-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.