| Is it mandatory for a 5 inch pound torque wrench |
| 02-02-2021, (Subject: Is it mandatory for a 5 inch pound torque wrench ) Post: #7 | |||
| |||
| RE: Is it mandatory for a 5 inch pound torque wrench When was the last time the Jake harness was replaced? They get brittle from heat and can fail with age. If you do not know the age of the harness, might just be a good idea to replace it now while you are in there. And, if the original engine harness is on there, it could be broken or green wiring, etc. One item on my to do list, is a new engine harness, as they do not last forever. Your issue sounds more electrical than mechanical. But... I'm not an expert. User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.