Is it mandatory for a 5 inch pound torque wrench

Rawze.com: Rawze's ISX Technical Discussion and more

New: Rawze's amazon Page

A big THANK YOU For those who have recently Contributed towards keeping the lights on around here. It helps keep the website costs at bay and goes towards helping others with their trucks.

I want to personally thank everyone who has donated to the forum recently. It helps pay for the $790/month internet bill that the forum consumes. - Thank you again.

YOU NEED AN INVITATION CODE TO Register! -- To obtain an invitation code, please e-mail [email protected] with a reason why you want to join. This keeps the spammers out and our forum clean.

Current time: 11-26-2024, | ShoutboxHello There, Guest! (Login — Register)

Threaded Mode | Linear Mode

Is it mandatory for a 5 inch pound torque wrench

02-04-2021, (Subject: Is it mandatory for a 5 inch pound torque wrench )

Post: #12

JimT

Offline

Mostly Harmless (1063 Likes)

Posts: 1,163
Joined: Jun 2019

Thanks: 1106
Given 1063 thank(s) in 605 post(s)

RE: Is it mandatory for a 5 inch pound torque wrench

I could be wrong with regard to a cm570 as I don't know too much about it, but the truck make/model shouldn't be an issue. You're talking about an engine only wiring harness, connecting internal parts to the ECM. That harness doesn't interface with the truck. Should be able to search your ESN and pull up the cummins part number on quickserve or on parts.cummins.com

{video deleted by Rawze. no torque wrench used, a lot of mistakes.}.

User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."

Return to Top | find

« Next Oldest | Next Newest »

Messages In This Thread

Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Chamberpains - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - marek4792 - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Waterloo - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-01-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Waterloo - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - 90petercar - 02-02-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - JimT - 02-04-2021

RE: Is it mandatory for a 5 inch pound torque wrench - Rawze - 02-05-2021,

RE: Is it mandatory for a 5 inch pound torque wrench - JimT - 02-05-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.

Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2024 MyBB Group | Theme by Laughing Inc - Web Design