CM2350 gear housing gasket

new reply

Threaded Mode | Linear Mode

CM2350 gear housing gasket

02-08-2021, (Subject: CM2350 gear housing gasket )

Post: #4

Waterloo Offline

HMR-Contrinbuting V.I.P. (4129 Likes)

Posts: 4,617
Joined: Oct 2014

Thanks: 5334
Given 4129 thank(s) in 2094 post(s)

RE: CM2350 gear housing gasket

(02-08-2021 )eggtrucks Wrote: What is the correct way to unload scissor gear? Quickserve says turn 2 screws out until its unloaded. Does it matter which 2 screws? and do i need to mark the 2 that i loosened and then make sure to tighten those same 2?

What is lubriplate? Is there alternatives i could use?

Having trouble finding Loctite 609 for cam gear. Does it need to be this or can i use a different loctite?

Check your local bicycle shop for the LocTite, they sometimes sell it.

User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

CM2350 gear housing gasket - eggtrucks - 02-08-2021,

RE: CM2350 gear housing gasket - Mattman - 02-08-2021,

RE: CM2350 gear housing gasket - Waterloo - 02-08-2021

RE: CM2350 gear housing gasket - Pigpen 2869 - 02-08-2021,

RE: CM2350 gear housing gasket - SemiSweet - 02-08-2021,

RE: CM2350 gear housing gasket - Rawze - 02-09-2021,

RE: CM2350 gear housing gasket - tree98 - 02-08-2021,

RE: CM2350 gear housing gasket - Rawze - 02-09-2021,

RE: CM2350 gear housing gasket - eggtrucks - 02-09-2021,

RE: CM2350 gear housing gasket - Starlight - 02-09-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.