EGR cooler alternative.
02-10-2021, (Subject: EGR cooler alternative. ) 
Post: #15
RE: EGR cooler alternative.
(02-10-2021 )Smiling lemon Wrote:  Do you know what the orifice size is? I have a cm2350 and was thinking bang in freeze plugs and weld them in place

like i mentioned in the quick-chat...


FREEZE PLUGS WILL NOT HOLD UP TO THE 90+ PSI OF HOT EXHAUST PRESSURES IN THE EXHAUST MANIFOLD!!!!!!!!!!--- THEY WILL EVENTUALLY BLOW OUT AND DESTROY THE TURBOCHARGER OR THE ENIGNE!!!!!!!!!!!!!

YOU NEED SOMETHING THICK TO WELD UP INTO THE ENDS OF AN EGR COOLER!!!


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: EGR cooler alternative. - Rawze - 02-10-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.