| Anaerobic sealants |
| 02-24-2021, (Subject: Anaerobic sealants ) Post: #1 | |||
| |||
| Anaerobic sealants I'm waiting on my piston and liner kit, so I figured I would reseal my front structure. I've seen some references to sealants used with front gear and rear flywheel housing gaskets, some say rtv... While I'm not opposed to rtv, I just want to make sure I end up using the best thing available for this application. If it matters, mine is not currently leaking, just being done while it's apart. User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker Overhauled @ 927k | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Anaerobic sealants - dhirocz - 02-24-2021 RE: Anaerobic sealants - tree98 - 02-24-2021, RE: Anaerobic sealants - Rawze - 02-24-2021, RE: Anaerobic sealants - Waterloo - 02-24-2021, RE: Anaerobic sealants - JMBT - 03-05-2021, RE: Anaerobic sealants - dhirocz - 03-06-2021, RE: Anaerobic sealants - Waterloo - 03-07-2021, RE: Anaerobic sealants - dhirocz - 03-07-2021, RE: Anaerobic sealants - Nilao - 03-07-2021, RE: Anaerobic sealants - Waterloo - 03-07-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.