Anaerobic sealants

new reply

Threaded Mode | Linear Mode

Anaerobic sealants

02-24-2021, (Subject: Anaerobic sealants )

Post: #4

Waterloo Offline

HMR-Contrinbuting V.I.P. (4140 Likes)

Posts: 4,617
Joined: Oct 2014

Thanks: 5334
Given 4140 thank(s) in 2097 post(s)

RE: Anaerobic sealants

I had to use some red RTV on my top front cover after the in frame. The gasket itself was fine, apparently the cover was a bit warped on the compressor side. I used a very tiny bead on the outside of the string gasket, that solved the oil leak.

User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Anaerobic sealants - dhirocz - 02-24-2021,

RE: Anaerobic sealants - tree98 - 02-24-2021,

RE: Anaerobic sealants - Rawze - 02-24-2021,

RE: Anaerobic sealants - Waterloo - 02-24-2021

RE: Anaerobic sealants - JMBT - 03-05-2021,

RE: Anaerobic sealants - dhirocz - 03-06-2021,

RE: Anaerobic sealants - Waterloo - 03-07-2021,

RE: Anaerobic sealants - dhirocz - 03-07-2021,

RE: Anaerobic sealants - Nilao - 03-07-2021,

RE: Anaerobic sealants - Waterloo - 03-07-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.