Anaerobic sealants

[dhirocz]

I've got all the basics, plus:
2 new cams
Cam retainer plate
Whole new IFSM. That was fun piecing together.
Turbo and actuator
All plumbing to/from turbo and air compressor
Steering gear, drag link, pitman arm and reseal pump
A/C discharge hose and evap core. Already replaced/serviced the rest of the system.
Blend door actuators and the rubber one way valve on the air box that controls direction of airflow
All 3 batteries
Last 2 original injectors
Radiator, water pump and oil cooler and both thermostats
Upgrading my hood mirrors to those from a T680

That doesn't count the 5k I blew 2 months ago ditching my old steel inner wheels and 726's, or any other recent parts for that matter(alt, starter, kit masters fan clutch and solenoid, pulleys, etc)

Going to be replacing the heat blanket on the firewall that's falling down and my intermittent delay wiper motor.

I considered the front wiring harness, but mine are easy to get to, engine assembled or not. Since I'm not having electrical issues yet, I figured I'll order a new harness to have on hand for later.

I'll be glad when this is done...