Threaded Mode | Linear Mode

Wiseman

(08-18-2016 )389guy Wrote: http://www.m18performance.com/product-p/...ld-kit.htm

I just came across this kit while looking for a full rebuild kit for the turbo, has anyone ever heard of this?

And why isn't there a seal kit availible for the holset?

On your first question I can't give you an answer before I slide a file over this parts . If you wonder why , I'll tell you .
Original/genuine Holset bushings, shaft , fork neck and the two square pieces that go on the fork are case hardened. With other words they're hard as ball bearing to outstand the countless moving back and forth during normal operation under high temperatures.
The cage and nozzle are made of chrome/nickel alloy capable of outstanding extremely high temperatures without any distortions and melting. The shafts attached to the cage are hardened same as the above mentioned parts .
All this parts in this kit are most likely made in China. We all know that they are capable of making parts for Holset and they're doing it . But who can vouch this are coming from the same factory that make parts for Holset and their strict demands and are not some lookalikes from god knows where ???
Well..... I hope you get my point ....
I'm taking my time to write this because I have solid experience with Chinese lookalikes , knockoffs and such . About this particular one I can't tell much before the file test is done .
I can talk about another brand for very long . It was good thread with pictures and so but is gone .

On your second question.
There's seal kit made in England (this is where Holset actually got born ) and is made by Melett (highly regarded company).