Side to side liner height variance

[Rawze]

(03-09-2021 )dhirocz Wrote:  My variance for #1 is on the driver's side...that's where it is higher.

Is there a corrective measure for this, or is the .0005 not enough to pose an issue with the exhaust side being lower?

I'm trying to keep in mind that I have a number of variables here as well, so I'm not trying to be too paranoid, though my inner perfectionist is haunting me at midnight.

sounds ok to me. just make sure your height is correct.

also make sure your measuring it without the anti-carbon rings installed yet too... and that you have used 100 ft-lbs of even pressure to hold a liner down to see what height it ended up at.