A few issues
08-19-2016, (Subject: A few issues ) 
Post: #2
RE: A few issues
Might need to pull the cover and check for any damage to the harness to the jakes, as I hear it can be pretty easy to break when doing work up top. Also try and run an overhead set to make sure that they are within spec as well. Did you update your injector number in insite? I think it's the trim number?? It will cause issues if you don't, and that may be the cause of the smoke. Hopefully someone will chime in with some more info, but hopefully this will help.


User's Signature: 2012 Cascadia ISX15 CM2250
replyreply


Messages In This Thread
A few issues - chaos2law - 08-19-2016,
RE: A few issues - trdodd07 - 08-19-2016
RE: A few issues - Hammerhead - 08-20-2016,
RE: A few issues - chaos2law - 08-21-2016,
RE: A few issues - Hammerhead - 08-21-2016,
RE: A few issues - chaos2law - 08-21-2016,
RE: A few issues - trdodd07 - 08-21-2016,
RE: A few issues - Rawze - 08-22-2016,
RE: A few issues - chaos2law - 08-22-2016,
RE: A few issues - chaos2law - 08-23-2016,
RE: A few issues - ntadiesel - 08-23-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.