CM 870 idle issue after start up

[Craag]

(03-25-2021 )Chamberpains Wrote:  Part 1 https://youtu.be/MWiSwgcwIoc

Part 2 https://youtu.be/_WeiDC6S8Lw

This is your fuel system in depth. Watch and learn. Then start to pull things apart and check them yourself. Don't rely on a stealershit to do anything but lighten the load in your wallet.

Rawze also has a video on how to check your fueling/metering actuators. I can't find the video right now but you should probably have a look at them. These could be the cause of some of your problems. I Think its in here somewhere https://www.youtube.com/channel/UCZ08qn4...LSQ/videos

I had seen Rawzes thread on the actuators when I first googled the issue. I'll have to check out the video. A comment mentioned switching the front and rear ones to see if it makes a difference.

I guess a good place to start. Thanks!