HP Increase

[JimT]

(04-11-2021 )Wren Wrote:  was just wondering if it was able to go to 5-525 hp with the internals it has

I don't know the particulars for the 2350's and I don't have access to those manuals on quickserv. But for my 2250 there are a few internal components that are different from the factory for applications over 500HP, including a different oil cooler (more copper plates vs less steel plates). I would do a little research on the internal components before deciding on programming. As a side note however I found that my engine, a cm2250 450st, was built with all the components of a factory 500+ hp engine (in my case that included oil cooler, pistons, and liners). Unfortunately I'm not sure if there's any way to verify the parts without taking things apart. I didn't know until disassembly during my inframe.