Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / cm871 VGT nozzle rebulid kit to trust or not to trust?

new reply
cm871 VGT nozzle rebulid kit to trust or not to trust?
08-21-2016, (Subject: cm871 VGT nozzle rebulid kit to trust or not to trust? ) 
Post: #16
Rig Wrench Offline
Established member  (166 Likes)  
 		Posts: 264
Joined: Nov 2014
Thanks: 94
Given 166 thank(s) in 89 post(s)
RE: cm871 VGT nozzle rebulid kit to trust or not to trust?
The 870 cooler ports don't go to the rear of the block. One is around the number 2 cylinder area, the othe is in the thermostat housing, they are roughly half the size of that of the 871/2250 as well. Cm 570 has no external coolant passages that I can find
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: cm871 VGT nozzle rebulid kit to trust or not to trust? - Rig Wrench - 08-21-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication