Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / cm871 VGT nozzle rebulid kit to trust or not to trust?

new reply
cm871 VGT nozzle rebulid kit to trust or not to trust?
08-21-2016, (Subject: cm871 VGT nozzle rebulid kit to trust or not to trust? ) 
Post: #17
Rawze Online(Online)
Forum Reject  (14143 Likes)  *******

 		Posts: 11,346
Joined: Jun 2013
Thanks: 6012
Given 14143 thank(s) in 6229 post(s)
RE: cm871 VGT nozzle rebulid kit to trust or not to trust?
(08-21-2016 )Rig Wrench Wrote:  The 870 cooler ports don't go to the rear of the block. One is around the number 2 cylinder area, the othe is in the thermostat housing, they are roughly half the size of that of the 871/2250 as well. Cm 570 has no external coolant passages that I can find

Thanks, did not know that.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: cm871 VGT nozzle rebulid kit to trust or not to trust? - Rawze - 08-21-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication