Isx skipping under heavy oil load and small oil leak

[JimT]

To me it appears (based on the pictures) that the driver front corner of the oil pan gasket might be the culprit. Right at the front where the block and gear box meet, you're supposed to put some sealant there. That's where the pictures show the heaviest amount of oil. Could also be coming from the front gear box or where the air compressor bolts in (bolts on front and back are visibly wet). Again, just a guess based on the pictures posted. The gasket for the oil pan does appear to be leaking/wet in a number of places too.

When I reinstalled my oil pan after my inframe Rawze suggested I used a plumbers putty or something (my memory is a little blurry on the details right now). Painted on a small patch in each corner and haven't had any leaks from any of the corners, or anywhere else.