| A few issues |
| 08-21-2016, (Subject: A few issues ) Post: #5 | |||
| |||
RE: A few issues (08-21-2016 )chaos2law Wrote: I appreciate the ideas, I'll be popping the lid as soon as I get home. Was worried about the turbo so I inspected what I could and checked the cold side. Everything looks good, I'll have to pull the actuator off when I get back too. DO NOT PULL THAT ACTUATOR UNLESS YOU HAVE INSITE!!! Insite is required in order to properly calibrate the actuator PRIOR to installation. It is highly unlikely you could remove and replace it and get lucky to drop it back on properly. It's not immposible, but it's virtually immprobable, don't take the chance. User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..." | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
A few issues - chaos2law - 08-19-2016, RE: A few issues - trdodd07 - 08-19-2016, RE: A few issues - Hammerhead - 08-20-2016, RE: A few issues - chaos2law - 08-21-2016, RE: A few issues - Hammerhead - 08-21-2016 RE: A few issues - chaos2law - 08-21-2016, RE: A few issues - trdodd07 - 08-21-2016, RE: A few issues - Rawze - 08-22-2016, RE: A few issues - chaos2law - 08-22-2016, RE: A few issues - chaos2law - 08-23-2016, RE: A few issues - ntadiesel - 08-23-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.