Fan Clutch

[JimT]

Sorry, should have mentioned a few things.

2012 Pete 587

As installed I can't get the fan and clutch assembly out with the radiator in the way, too tight. No space to remove the fan blades and I'd need to tilt the clutch assembly to get it out. I was thinking about leaning the rad forward a bit to (hopefully) give me the space needed. Draining/refilling the coolant (in order to remove the rad) is a hassle, but it's the AC system that I really want to avoid disconnecting. Don't have the tools to drain/fill the system.

Thanks dhirocz. Might look at replacing the fan blades too. They seem ok, but if I have it all apart might be a good time.