Fan Clutch |
04-30-2021, (Subject: Fan Clutch ) Post: #13 | |||
| |||
RE: Fan Clutch When you replace that Keyser hub your gonna want to take EXTRA care and I mean seriously Extra care to replace the black alignment bushing on straight on the hub and clutch drive. It's really easy to get it misaligned and mess it up. It's nothing to have fear of doing. It simply slides on. I usually install it on the clutch assembly then gently line it up on the hub and push on with my hand until its flush and flat. Then install the mount bolts. If you think you may have spun the hub out of alignment of the bushing then pull it back off and align it again. Don't just assume it's right and run the bolts down. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Fan Clutch - JimT - 04-26-2021, RE: Fan Clutch - Nilao - 04-26-2021, RE: Fan Clutch - Smiling lemon - 04-27-2021, RE: Fan Clutch - Rawze - 04-27-2021, RE: Fan Clutch - dhirocz - 04-27-2021, RE: Fan Clutch - JimT - 04-27-2021, RE: Fan Clutch - Rawze - 04-27-2021, RE: Fan Clutch - JimT - 04-29-2021, RE: Fan Clutch - Rawze - 04-30-2021, RE: Fan Clutch - Chamberpains - 04-30-2021, RE: Fan Clutch - Rawze - 04-30-2021, RE: Fan Clutch - JimT - 04-30-2021, RE: Fan Clutch - Chamberpains - 04-30-2021 RE: Fan Clutch - smorgan87 - 05-01-2021, RE: Fan Clutch - JimT - 05-01-2021, RE: Fan Clutch - JimT - 05-01-2021, RE: Fan Clutch - Rawze - 05-02-2021, RE: Fan Clutch - Chamberpains - 05-02-2021, RE: Fan Clutch - JimT - 05-02-2021, RE: Fan Clutch - Chamberpains - 05-03-2021, RE: Fan Clutch - JimT - 05-04-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.