Isx 15 files

[Rawze]

(05-01-2021 )ab21 Wrote:  I have 2 trucks that have cummins isx15. One is 400hp and one is 450hp. On the 400hp I had bought a tune that I installed from PukeDits. Then I put it back to stock and tried to install it on the 450hp but it wouldn't worl. The EF files are different and somehow the 450 hp had gotten the ef file of the 400hp and when I used the Insite software to do calibration on the 450 hp and it calibrated to the 400hp. Has anyone had this issue? Or an answer how to put it back to the original file of the ecm? Thanks in advance

Take them to the stealers$it and have the correct and latest software put back into each truck according to the engine ser#. A few hundred bucks and your back where you should be with them... and learn you lesson that your only going to get destroyed equipment if you keep on using those rip-off "tuning" companies like that. - nothing but engine destroying garbage.

YOU ALSO CANNOT JUST COPY THE SOFTWARE FROM ONE TRUCK TO THE OTHER... even if they are identical twins ... The engine data is different for each once they run ... all the engine data like injector corrections, cylinder balancing data, odometer, and a ton of other stuff is unique to one engine after the first 10 minutes of run time, after a factory flash program has been installed.

NEXT: that company does nothing but sell HORRIBLE BAD ENGINE DESTROYING PROGRAMS NOT FIT FOR A LAWN-MOWER NONETHELESS A COMMERCIAL ENGINE!!!... FOR MANY YEARS NOW, THEY HAVE BEEN DESTROYING ENGINES LIKE MAD!!!.... I HAVE NO IDEA WHY SO MANY TRUCK OWNERS TRY TO USE THOSE CLOWNS OR ANY OF THEIR AFFILIATES FOR ANYTHING BUT DESTROYING THEIR ENGINES ALL IN THE NAME OF SOME IGNORANT SUPER-TRUCKER GLORY!.

More than 95% of all the shops that do "tuning" are beyond horrible brain butchers... going to places like that is asking to do nothing but destroy your engine.

Eucate yourself on this subject... here is a good starting place...
http://rawze.com/forums/showthread.php?t...5#pid13255

-- What issue(s) are you trying to solve any ways?. Some history and background, what you haul, make/model engines and trucks, etc... would help.

you mentioned the files begin with "EF" .. are these CM2350's?

and what software/adapter are you using on them?

What modifications have been done to the trucks/engines? .. deleted (de-mandated)? ... Are there any hardware mods done?

- there are ppl that can help do things right on here ... but no one on here is going to help you tear up your engines because you want big power.... you will simply get kicked off here if that is all your looking for ... it is downright stupid to do things that severely shorten engine life, and no one on here supports that garbage.