Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / CEL after EGR tune up

new reply
CEL after EGR tune up
05-08-2021, (Subject: CEL after EGR tune up ) 
Post: #5
Contributing V.I.P.tree98 Offline
Contributing V.I.P.  (1784 Likes)  ****

 		Posts: 3,025
Joined: May 2016
Thanks: 1026
Given 1784 thank(s) in 1127 post(s)
RE: CEL after EGR tune up
(05-08-2021 )Lead_sled Wrote:  I’ll try lifting the IMAP sensor and replugging. It has to be a sensor connection. All o-rings are in place. Truck was in off position when I did everything.

Only thing I fear before I do it is that the CEL light will remain on no matter if the problem is fixed.

It will turn off if you fix it. The code will be stored though so you're able to go in later and see what it was.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: CEL after EGR tune up - tree98 - 05-08-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication