Grinding noise during deceleration. |
05-19-2021, (Subject: Grinding noise during deceleration. ) Post: #4 | |||
| |||
RE: Grinding noise during deceleration. (05-14-2021 )Chamberpains Wrote: Sounds like either the clutch brake went out. Your suspension is dumped and putting stress on the driveline and/or possibly a rear-end is toast. But if it only happens on the high hole it may be a problem with the slider on the main shaft for 5th and 10th. Does it do what you describe only in 10th or is it in 5th too? Any other drivability problems in any other gears? Thanks a lot. You were right. It was a bad height leveling control valve. You’re a life saver. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Grinding noise during deceleration. - Hammer Transportation - 05-14-2021, RE: Grinding noise during deceleration. - Chamberpains - 05-14-2021, RE: Grinding noise during deceleration. - Hammer Transportation - 05-19-2021 RE: Grinding noise during deceleration. - Signature620 - 05-15-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.